The next screen allows for the selection of the disks which will be part of the RAID array. After this setup process is complete, an operating system can be installed. Check the computer to see which one your computer has. Please try again shortly. When finished, or at any step in the process, press the escape key to exit the current view, canceling or saving any changes.

Uploader: Gojora
Date Added: 12 June 2012
File Size: 52.50 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 82439
Price: Free* [*Free Regsitration Required]

See your browser’s documentation for specific instructions. Find the serial number of hard disk drive HDD that is labeled Degraded. The group from which the original disk was missing is indicated. Identifying the defective hard disk drive You must first find the serial number of the defective hard disk drive.

Press esc to exit the utility, and then turn off the computer. The radio button marked Replace Missing PD is checked. The lis screen will display the physical disks on the left and the proposed virtual disk RAID ldi on the right as a preview of the proposed disk configuration.

The failed hard disk drive is colored red. Maximum supported hard drives xw Under DG Missing Rowselect the location of the disk.


HP LSI Logic 1068e SAS Driver

Identifying and fixing the Hard Disk Drive 106e8 Based on the previous tables find the resolution type that matches your computer, and then follow the corresponding steps to resolve the hard disk drive issue. Workstation Emits a Continuous Beep. If a disk failure occurs, the change to the RAID array will be indicated by a message on the screen before entering the utility. Asia Pacific and Oceania.

From the MegaRAID Configuration Wizard screen, there are options available to clear any existing device configuration, add new drives to an existing configuration, or create a new configuration from scratch. The Virtual Agent is currently unavailable. For more information, see the HP advisory: The first view shows the physical disks connected to the adapter, any RAID arrays presently configured, as well as the status of both physical and virtual disks.

For more information, refer to the following table:. Not all configurations that are made available by the RAID chipsets or plugin cards are supported by HP; only the configurations listed below are supported on HP Linux workstations.

HP LSI Logic e SAS Driver – Business – Probably all

Not all of them are supported options for HP Linux workstations. The first screen will display a list of available adapters.

Select View Existing Array. This screen can be used to change the boot order of the adapters. The next screen will list the disks. Select the new unconfigured disk. Click on the new unconfigured disk in order to configure it and add it to the RAID array. Europe, Middle East, Africa. The next screen will display properties of the selected adapter.


From here, the disks that are configured to be hot spares can be managed, the array can be activated, deactivated, or deleted, and if the array is not at an Optimal status due to a disk failure or sae problem, it can be synchronized from this menu.

RAID 1 Mirrored configuration. In a striped RAID configuration, data is split between the two hard disk drives. It is critical to create recovery discs and have a strategy for backing up data in case issues arise.

At any point during Logjc configuration or management, press the home button to return to the main screen of the configuration utility.

Select Go to complete the operation. Select the location of the disk.